Ikegami BS-98 Скачать руководство пользователя страница 11

Страница: 11 / 118

vii

BS-98 1409 VER1 (U) (E)

HOW TO READ THE OPERATION MANUAL

HOW TO READ THE OPERATION MANUAL

This page explains general notes on reading the BS-98 Operation Manual, and the symbols and notations used in the manual.

■

Notes on the Manual

- The target readers of this manual are the people, who has basic knowledge on handling of television cameras for broadcasting,

base stations, and/or control panels.

- The contents of this manual are subject to change without notice in the future.

■

Symbols

The symbols used in this manual are as follows:

CAUTION:

Things you have to be careful during operation. Be sure to read.

Note:

Supplementary information or guidance

Reference:

Sections where related information is available

■

Notations

The following notations are used in this manual.

This product, BS

Indicates BS-98 Base Station.

Camera head

Indicates general broadcast cameras.

■

Illustrations and Displays

The illustrations and displays in the text are provided for explanation and may be slightly different from the actual equipment or
image.

■

Related Manuals

Refer to the operation manuals and maintenance manuals accompanying the camera head, BS, and each control panel to be used.

Содержание BS-98























































































































Результаты поиска

Содержание BS-98

Отзывы:

Ikegami BS-98, Руководство по эксплуатации, Страница: 11 / 118

Результаты поиска

Содержание BS-98

Отзывы: