Ikegami BS-98 Скачать руководство пользователя страница 35

Страница: 35 / 118

BS-98 1409 VER1 (U) (E)

2.2 BS-98

Rear

View

Modules on the Rear of the BS-98

Modules on the rear are also of slot type and can be removed/inserted as well as the modules on the front.

④ VOUT
module

③ HOUT
module

② RET̲IN
module

① MPU&REF
module

①

MPU&REF Module

1. REF connector

It inputs the reference signal (HDTV PS/S or SDTV VBS/BBS) from the external source. It is also
possible to input the signals, of which the 10

eld ID signal conformable to SMPTE318M is added,

to VBS/BBS.
Bridge connection is possible.

2. Ethernet RJ45 (8P8C) connector

This is a connector to be used for connecting with the system corresponding to Ethernet.

3. ARCNET connector

This is a connector for ARCNET. It is connected to CP HUB (option) by the coaxial cable.
Refer to the Instruction manual of CP HUB to be used for details.

CAUTION:

- Use the F-head type conversion plug for connection. In addition, use 75

type coaxial cables and

terminators.

- When the connector contacts the housing, failures may be caused. Pay close attention when

handling.

- When using the F-head type conversion plug, cover with an insulation cover or other item.

4. OCP/CCP connector

Connect with CP cable and OCP.

5. CSU/CCP connector

Connect with CP cable and CSU.

Содержание BS-98























































































































Результаты поиска

Содержание BS-98

Отзывы:

Ikegami BS-98, Руководство по эксплуатации, Страница: 35 / 118

Результаты поиска

Содержание BS-98

Отзывы: