Ikegami BS-98, Руководство по эксплуатации, Страница: 110 / 118

96
BS-98 1409 VER1 (U) (E)
6.2 ALARM Indicator on the Control Panel Flashes ON and OFF
■
List of Self Diagnostic Information
The following tables list the self diagnostic information for the standard speci fi cation.
List of Self Diagnostic Information
Diagnosed Item Description Diagnosis Result Meaning
Head Power Power status of the camera head ON The camera head is powered ON.
OFF The camera head is powered OFF.
Head Fan Rotating status of fan of the camera
head or FA (Fiber Adaptor) AUTO SSLOW Super-slow in auto mode
AUTO SLOW Slow in auto mode
AUTO NOR Normal in auto mode
AUTO FAST Fast in auto mode
SSLOW Super-slow in manual mode
SLOW Slow in manual mode
NOR Normal in manual mode
FAST Fast in manual mode
NG Fan has stop.
Head Temp Internal temperature of the camera
head OK Normal
NG The temperature is abnormally high or the
difference between the internal temperature
and outside-air temperature is at least 25°C.
Head Battery Status of the battery in the MPU
module of the camera head OK Normal
NG The backup battery voltage is low.
Head Memory Status of the RAM in the MPU module
of the camera head OK Normal
NG Data in the module is destroyed
BS Fan Rotating status of the fans on the rear
and inside of the BS OK Normal
NG Internal cooling fan either has stopped.
BS Temp Internal temperature of the BS OK Normal
NG The temperature is abnormally high or the
difference between the internal temperature
and outside-air temperature is at least 25°C.
BS Battery Status of the battery in the BS CONT/
REF module OK Normal
NG The backup battery voltage is low.
BS Memory Status of the RAM in the BS
MPU&REF module OK Normal
NG Data in the module is destroyed.
BS >>> Head
(BS to Head
transmission) OPT Level Optical signal level sent from the BS
to the camera head (Detect the optical
receiving level at the camera head
side and display the status). OK Good
ATTEN The amount of light received decreased.
WARN The amount of light received significantly
decreased.
NG Light cannot be received.
SDI Status Status of SDI signal OK The format is normal and there is no CRC error.
NG The format is abnormal or there is a CRC error.
Comm Status Status of the command signal sent
from the BS to the camera head OK Normal
NG No command signals are sent, or a CPU error
occurs.
Head >>> BS
(Head to BS
transmission) OPT Level Optical signal level sent from the
camera head to the BS (Detect the
optical receiving level at the BS side
and display the status). OK Good
ATTEN The amount of light received decreased.
WARN The amount of light received significantly
decreased.
NG Light cannot be received.
SDI Status Status of SDI signal OK The format is normal and there is no CRC error.
NG The format is abnormal or there is a CRC error.
Comm Status Status of the command signal sent
from the camera head to the BS OK Normal
NG No command signals are sent, or a CPU error
occurs.