Ikegami BS-98 Скачать руководство пользователя страница 33

Страница: 33 / 118

BS-98 1409 VER1 (U) (E)

2.2 BS-98

Rear

View

2.2 BS-98 Rear View

This section explains the names and functions of the parts on the rear of the BS-98.

① CAMERA connector

⑥ SYNC OUT
connector

⑦ AES OUT
connector

⑩ AC Power inlet

⑪ SUB REF connector

③ DATA TRK connector

④ REMOTE connector

② MIC OUT connector

⑤ COMMUNICATION connector

⑨ IF connector

⑧ TALLY OUT connector

Reference:

For model names of connectors and details of assignments, refer to "4.6 Connector for External Connection".

①

CAMERA connector

Optical

ber composite camera cable, This connector is to connect the camera head and the BS.

②

MIC OUT connectors

Output the audio signals that are input to the MIC IN connectors on the camera head. (2 channels analog audio)

③

DATA TRK connector

This is a connector for RS-422 communication with the camera head. (Channel #1)

④

REMOTE connector

This is a connector used to externally control the microphone gain of the camera head.

⑤

COMMUNICATION connector

This connector is used for a connection with an external system.
Input/output of Intercom system, program audio input, and TALLY control input are assigned.

⑥

SYNC OUT connector

The signal for synchronization of the external equipment is output. In "SYNC OUT" setting under "ENGINEER (1/2)" ->

"OUTPUT FORMAT" in BS menu, HDTV Tri-Level sync signal output or SDTV synchronizing signal output can be selected.

Note) SDTV synchronizing signal is not the BBS.

⑦

AES OUT connector

It is an output connector of the digital audio signal (75

output). The signal is conformable to the AES/EBU format.

Содержание BS-98























































































































Результаты поиска

Содержание BS-98

Отзывы:

Ikegami BS-98, Руководство по эксплуатации, Страница: 33 / 118

Результаты поиска

Содержание BS-98

Отзывы: