16
Commissioning
Maintenance and cleaning
The equipment is maintenance-free. It is only subject to the
natural wear and tear of components and their statistical
failure rate.
Cleaning
Disconnect main plug prior to
cleaning!
Use only cleaning agents which have been approved by
IKA
®
to clean the instrument.
Dirt
Cleaning agent
Dye
isopropyl alcohol
Construction material water containing tenside/isopropyl alcohol
Cosmetics
water containing tenside/isopropyl alcohol
Foodstuffs
water containing tenside
Fuel
water containing tenside
For materials which are not listed, please request informa-
tion from
IKA
®
.
Wear protective gloves during cleaning the instrument.
Electrical devices may not be placed in the cleansing agent for
the purpose of cleaning.
Do not allow moisture to get into the equipment when
cleaning.
Before performing a non-recommended method of clean-
ing or decontamination, the user must ascertain with
IKA
®
that this method will not destroy the instrument.
Maintenance
• Remove the top cover: by unscrewing the 4 screws on
bottom.
• Examine hoses visually for cracks. If cracks have developed
or the hose becomes brittle, replace with suitable new
ones.
• To clean the housing of the device, use only water with a
detergent that contains tensides, or use isopropylalcohol
for stubborn soiling.
Connect vacuum hose from inlet nozzle to recipient. Plug
in power socket to mains and flip rocker switch (
A
, see
Fig.
1
) to “
I
” position to switch on the device.
Unscrew the 4 screws
View without the top cover
Fig. 4
Fig. 5
Observe the ambient conditions (temperature, humidity etc)
listed under technical data.
