IKA C 6000 global standards, Руководство по эксплуатации

Страница: 41 / 64

41
Combustion aid
You can modify the list or add new combustion
aids to it.
Select a combustion aid from the list and click on
the „Edit“ button to activate the input fields for
it . You can the change the name and the calori-
fic value. Click on „Load“ to modify the selected
combustion aid. Click on „Add“ to add a new
combustion aid to the list with the data that were
input. Click on „Cancel“ to make no changes.
„Balance“ tab
You can select the balance from a list.
The default values for the serial interface are set
for each selected type of balance. If necessary
you can change the values for Baud rate, parity,
data bits and stop bits.
Click on „OK“ to use all the changed settings for
the subsequent calorimetric procedures.
Click on „Cancel“ to leave all the settings un-
changed.
Balance
„Combustion aids“ tab
There are two different combustion aids available
for use in order to achieve correct combustion
of samples. The external energies contributed by
the aids are input or calculated at preparation of
the sample and are included automatically in the
calculation of the calorific values.
A list is provided for the most commonly used
combustion aids, showing their calorific values.
If one of these combustion aids is used during
preparation of the sample you need only input its
weight or load it from the balance.