IKA C 6000 global standards, Руководство по эксплуатации

Страница: 28 / 64

28
Click on the necessary figures and the decimal
point, and press OK to confirm the input.
You can also load the weight from a connected
balance or request it by clicking on the „Balance“
button. The value is then entered automatically.
All other inputs are optional.
The default is that the decomposition vessel is not
selected manually but is identified when it has
been hung in the calorimeter.
Note: weight must be < 5 g.
An alphanumeric virtual keyboard appears for
the input options „Designation“, „User“, „Proper-
ties“:
Click on OK to complete the respective input.
There is a special procedure for the designation:
the default is that the designation for a sample is
constructed from the current date and a sequen-
tial number. For instance JJMMTT07 denotes the
seventh sample processed on TT.MM.JJ.
This designation is also displayed the next time. If
the last characters of the designation is numeric,
this is incremented by one.
You can stop the use of the user-specific desig-
nation again every time: call up the „Designati-
on“ dialogue, delete the designation and click on
„OK“.
Highlight the „Calibration“ field if you wish to
perform a calibration.
The scroll bar allows you to access additional in-
put fields for inputting the external energies. If no
special application procedures must be observed
you can here specify use of the „
IKA
®
ignition
thread“, „User-defined“ = 0, „User-defined“ = 0
default settings. This means that the default
IKA
®
ignition thread will be used as the ignition aid and
that no further combustion aids will be used.
Simulation
In some circumstances it may be helpful to check
some calorific value tests or to calculate possi-
ble test results without actually performing the
combustion test. This is particularly useful when
a calibration has been carried out instead of a ca-
lorific value determination or vice versa. This can
be corrected by simulation using the increase in
temperature from the wrongly interpreted mea-
surement. The decomposition vessel used can be
selected after activating the simulation.