Draco tera
182
2020-02-26
7. If you have created a Master/Sub CPU Unit, select
Configuration >
CPU Devices
in the main menu of the master matrix and press the
New R
button.
A switchable CPU Device will be created.
8. Enter an appropriate Device name into the
Name
field.
9. Assign the previously configured Extender Unit to the just created
Device by moving the Extender Unit from the
Ext available
field into
the
Ext assigned
field and save your settings.
10. Repeat steps 1 to 9 for the Sub Matrix.
11. Select
Configuration > System
in the main menu of the Sub Matrix
and set the
Sub Matrix
option to
Y
.
The OSD of the Sub Matrix will immediately freeze and will be only
accessible by using the keyboard command <'Hot Key'>, <s>, <o>.
12. Restart all I/O boards on which any
Cascade CON
or
CPU
Units
have been configured or alternatively restart the matrix.
13. Connect the Tie Lines to the matrices. Ensure that each
Cascade
CON
on one matrix is connected to
Cascade CPU
on the other matrix
in order to achieve switchability between two matrices.
The Matrix Cascading is now configured and can be used. Additional Tie
Lines are configured accordingly. The use of cascading is described in
Chapter 6.1.4, Page 207.
