IgniteNet SkyFire AC1200, Быстрый старт

Страница: 28 / 63

– 37 –
Wireless Settings
This chapter describes wireless settings on the access point. It includes the
following sections:
◆
“Radio Settings” on page 37
◆
“VLAN Settings” on page 50
Radio Settings
The IEEE 802.11 wireless interfaces include configuration options for radio signal
characteristics and wireless security features.
The access point can operate in several radio modes, 802.11a/a+n/AC (5 GHz) or
802.11b+g/b+g+n (2.4 GHz). Supported modes depend on the access point model.
Note that the dual ‐ band access points can operate at 2.4 GHz and 5 GHz at the
same time. The web interface identifies the radio configuration pages as:
◆ Radio 0 — the 5 GHz 802.11a/n/AC radio interface
◆
Radio 1 — the 2.4 GHz 802.11b/g/n radio interface
Each radio supports 8 virtual access point (VAP) interfaces based on the SSIDs,
referred to as VAP 0 ~ VAP 7. Each VAP functions as a separate access point, and can
be configured with its own Service Set Identification (SSID) and security settings.
However, most radio signal parameters apply to all VAP interfaces. Traffic to specific
VAPs can be segregated based on user groups or application traffic. The clients
associate with each VAP in the same way as they would with separate physical
access points. The AP supports up to a total of 127 wireless clients across all VAP
interfaces per radio.
4