IgniteNet SkyFire AC1200, Быстрый старт

Страница: 49 / 63

– 58 –
Chapter 5
| System Settings
Services
Figure 40: SSH Server Settings
The following items are displayed on this page:
◆ SSH Server — Enables or disables SSH access to the access point.
(Default: Enabled)
◆
Port — Sets the TCP port number for the SSH server on the access point.
(Range: 1 ‐ 65535; Default: 22)
◆ Allow SSH from WAN — Allows SSH management access from the WAN.
Telnet
Telnet is a remote management tool that can be used to configure the access point
from anywhere in the network. However, note that Telnet is not secure from hostile
attacks.
Figure 41: Telnet Server Settings
The following items are displayed on this page:
◆ Telnet Server — Enables or disables Telnet access to the access point.
(Default: Enabled)
◆ Port — Sets the TCP port number for the Telnet server on the access point.
(Range: 1 ‐ 65535; Default: 23)
◆ Allow Telnet from WAN — Allows Telnet management access from the WAN.
Web server
A Web browser provides the primary method of managing the access point. Both
HTTP and HTTPS service can be accessed independently. If you enable HTTPS, you
must indicate this in the URL: https://device:port_number]
When you start HTTPS, the connection is established in this way: