25
Select to move between
channels. Tap on the channel
number to type in the channel
number if known.
For this channel
enter the
address which
is to relate to
this channel.
Select to
temporarily
enable or
disable a
channel
Select gas
FLAMM, CO,
CO2 etc
Enter the
UNITS to
display.
% LEL,
ppm,%Vol
etc
Enter the hub
cable number
that this detector
is installed onto.
Note the first hub
is cable numbers
1 to 4.
Note that when a
set up button is
selected a popup
menu appears to
allow data to be
typed into the set up
box.
Tap here to enter the on screen tag for the detector (max 32 characters)
The Sensor Setup Menu
Notes
