22
The Engineer Menu (Passcode 50)
Select Engineer Mode and enter pass code 50
The following menu is then displayed
Select the tab at
the top of the
folder to access
each section.
Note that the
sensor tab is
displayed with its
page options by
default. Select
the EXIT tab to
return to normal
operation.
TAB GROUPS
SENSOR
RELAYS
ALARMS
CALS
SYSTEM
EXIT
FUNCTIONS
Sensor Channels (Change the number of active channels)
Sensor FIND (use to find addressable sensors)
Sensor Setup (setup channel parameters)
Sensor Test (Communication test function)
Sensor Diagnostics (Full diagnostics for the chosen detector)
Sensor Check (Sensor diagnostic Health Check)
Relay Channels (Change the number of system relays)
Relay FIND (use to Find addressable relays)
Relay Diagnostics (Communication test function)
Relay Test (Physical relay test)
Alarm Levels (set alarm levels for each detector)
Alarm Copy (copy alarm set up between channels)
Alarm Relays (Set up parameters for alarm activation)
Zero Sensor (Use to zero an individual sensor)
Zero All Sensors (Zero all connected sensors)
Calibrate Sensor (Calibrate an individual sensors)
One Man Calibration (one man walk round calibration)
Main global system settings
GSM Setup (Use to set up GSM functions)
|GSM Test (Test GSM operation)
Exit to normal gas detection operation
