44
T102 Setup Options Are Only
Displayed if the Module
Selection is Active. If the Option
is Selected to Indicate
‘Disabled’ Then These Options
Are Not Displayed
I/O Port Setup Options Are
Only Displayed if the Module
Selection is Active. If the Option
is Selected to Indicate
‘Disabled’ Then These Options
Are Not Displayed
Options available for the T102 Input allow:
Change of Unit Address, Change of Range,
Change of Gas Type (Typically CO, CO2, NO2 etc), Change of Units,
Add a Tag Line to the Sensor, to describe location etc
Options available for the IO Inputs allow:
Change of Unit Address, Change of Range,
Change of Gas Type (Typically CO, CO2, NO2 etc), Change of Units,
Add a Tag Line to the Sensor, to describe location etc
T102 Settings and module options
I/O 1 and 2 Settings and module options
T102
Settings
IO1
Settings
Enable as:
T102A (PID)
T102IR
I/O1 & 2 Enable as:
1.
Disabled
2. I
nput 4-20mA 24V
3. Input 4-20mA O
V
4. Input Volts OV
5. Input Digital OV
6. Input Digital 24V
3
7. Input Gas Meter OV, 0.001m
3
8. Input 0.01m
3
9. Input 0.1m
10. Output SSR SW+
11. Output SSR SW-
12. Output SSR Dual-
