Electronic pressure sensor
PI16xx PI18xx
23
10 Parameter setting
During parameter setting the unit remains in the operating mode. It continues its monitoring functions
with the existing parameters until the parameter setting has been completed.
10.1 Parameter setting in general
3 steps must be taken for each parameter setting:
1: Select Parameter
SP1
rP1
u
Press [Enter] to get to the menu.
u
Press [▲] or [▼] until the required parameter is displayed.
2: Set parameter value
100
120
u
Press [Enter] to edit the selected parameter.
u
Press [▲] or [▼] for at least 1 s.
w
After 1 s: setting value is changed:
incrementally by pressing the button once or continuously by keeping the button pressed.
Numerical values are incremented continuously with [ ▲ ] or decremented with [ ▼ ].
3: Acknowledge parameter value
