O3M area surveillance
28
⑥ ⑦
⑧
⑨
⑩
9� Pull out the locking lever
⑧
and
rotate it towards you�
10� Feed the remaining lines of the
E3M171 CAN adapter cable through
the rubber lip of the cover to the
outside�
11� Insert the cover guides
⑦
into
the insertion slots
⑥
of the
BasicController�
12� Place the buzzer inside the cover or
outside the cover using extension
leads�
When placing the buzzer inside
the cover:
►
Place the buzzer so that the
contacts of the BasicController
are not short-circuited�
13� Lay all supply and signal cables
separately�
14� Lay supply and signal cables away
from the device using the shortest
possible route�
15� The cables must be provided with a
strain relief at least 10 cm behind the
cable entry�
⑥ ⑦
⑧
⑨
⑩
16� Tilt the cover onto the BasicController�
> The cover guides and slots
⑨
serve
as a pivot point�
⑥ ⑦
⑧
⑨
⑩
17� Move the locking lever
⑩
back into
its initial position�
> The cover is locked�