O3M area surveillance
40
10.1.4
Zone defi nition - default settings
Zone definition
Zone definition - zones
Via the zone definition, the width
and length of the zones can
be set� The zones represent
risk levels, with the [ ] zone
representing the lowest risk level
and the [ ] zone representing
the highest risk level�
With the default settings, the
same value is set for the left and
right areas of the zone�
Objects within the [ ] zone
are ignored� This is particularly
suitable for obstructions in the
detection range of the 3D sensor�
The width and length of the zones can be set� The same value is
set for the left and right areas of the zone� Adding the left and right
areas gives the total width�
The minimum detection height is set under "min. height". Objects
below the minimum detection height are ignored� This reduces false
triggering by
●
ramps,
●
uneven ground,
●
objects close to the ground�
Zone definition - zones
The width and length of the zones can be set� The same value is set
for the left and right areas of the zone�
The minimum detection height is set under "min. height". Objects
below the minimum detection height are ignored�
Save the set zone values�
After saving, the system is
restarted and the display is in
the monitoring mode (→ "10.2
Monitoring mode").
Assignment of the function keys
[Back]
Show previous screen
[Next]
Show next screen
[ ]
Set the length and width of the [ ] zone [ ]
Set the length and width of the [ ] zone
[ ]
Set the length and width of the [ ] zone [ ]
Set the length and width of the [ ] zone
[-]
Decrease selected value
[+]
Increase selected value
[ok]
Confirm input
[Yes]
Save input
[No]
Don’t save input
Assignment of the navigation keys
[▲]
Select the previous menu item
[▼]
Select next menu item
[◄]
Show previous screen
[►]
Show next screen