21
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Operation
Control of the graphical user interface
>
4.1.1
Function keys
7090
The two
function keys
allow the operator to trigger specified
actions (e.g. tick a checkbox). The function of the function
keys changes depending on the context.
The two
text fields in the navigation status bar
are
associated with the function keys located directly below the
display. They indicate the action that will be triggered if the
function key is pressed in the current work step. If the function
key is not labelled, it means that it has no function in the
present situation.
Example (
→ figure):
► The left function key triggers the action [Select].
► The right function key triggers the action [Back].
>
4.1.2
Arrow keys
7091
The four
arrow keys
[
],[
], [
] and [
] can be used for
navigation and selection.
The
navigation compass
shows which of the four arrow keys
can be used in the respective work step.
Examples:
All arrow keys are active and will trigger a device
response when pressed.
Only the arrow keys [
] and [
] are active and will
trigger a device response when pressed.
