162
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Appendix
Fieldbus EtherNet/IP
Parameter
Description
Value range
Change byte order
Change byte order in a word
Setting applies to all data of
object class 4, instances 100
and 150
Disabled* =
Byte order in a word remains
unchanged.
Enabled =
Byte order in a word is inverted.
AS-i parameter download
Transmission of AS-i slave
parameters from host to
AC142n
Disabled* =
The following AS-i parameter data
is NOT sent to the AS-i system.
Enabled* =
The following AS-i parameter data
is sent to the AS-i system.
Param. slave 1(A) AS-i master 1
…
Param. slave 31(A) AS-i master 1
Param. slave 1B AS-i master 1
…
Param. slave 31B AS-i master 1
Param. slave 1(A) AS-i master 2
…
Param. slave 31(A) AS-i master 2
Param. slave 1B AS-i master 2
…
Param. slave 31B AS-i master 2
Parameters P3...P0 of the
individual AS-i slaves
P3...P0 = 0x0 (= 0b0000)
...
P3...P0 = 0xF (= 0b1111) for single slaves*
P3...P0 = 0x7 (= 0b0111) for A/B slaves*
* ... Default settings
In 'Top-down' configuration mode, the device-specific parameters are set via the fieldbus
projection software (
→
Configuration mode: Top-down
(
