112
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Setup
Start screen 'Basic settings'
>
6.2.1
Change the basic settings of the device
18511
To change the basic settings of the device:
1 Start the device
►
Connect the device to a circuit.
>
The device starts.
>
The display shows the start screen "Basic settings"
(picture).
2 Set the language of the GUI texts
►
The list shows the active language.
►
Use [
] / [
]to select the list.
>
The focus (= orange frame) is on the selected list.
►
Open the list with the left function key [Select].
►
Use [
] / [
] to mark the desired language and press
[Select] to activate it.
>
The GUI texts appear in the selected language.
►
Press [Next] to go to the next page.
3 Set the system time
Option 1: Set the system time manually
►
[Time] and [Date] show the current system time.
►
Activate [Activate NTP] checkbox.
>
Status LED =
►
In the [Time] roup, set the desired clock time one
position at a time.
►
In the [Date] group, set the desired date one position at a
time.
►
Press [Finish] to save the changes and go to the
standard start screen.
