ifm
Supplementary device manual Interface CANopen in the AS-i controllerE
Set-up
Basic settings of the fieldbus interface
98
9
Set-up
This chapter shows you how to get the CANopen interface started quickly
9.1
Basic settings of the fieldbus interface
NOTE
The settings on the controllerE must meet the following conditions:
The fieldbus address in the network must be unique.
Otherwise the following errors can occur:
No data transfer with the controllerE possible.
Or the connected network will be completely inoperable.
The necessary settings of the CANopen fieldbus interface of the controllerE can be made by means of
the integrated display and the four operating keys. In the menu [Fieldbus Setup] the user can make all
the necessary basic settings or view the present configuration.
[Menu] > [Feldbus Setup]
or
[Menu] > [Quick Setup] > [Feldbus Setup])
In any case the following parameters must be set on the unit for use on CANopen:
the fieldbus address
the fieldbus baud rate.
