ifm
Supplementary device manual Interface CANopen in the AS-i controllerE
Set-up
Setting and reading of the fieldbus parameters
103
16.
Fieldbus data
Command channel
1
>
Shows that the fieldbus module 11 (fieldbus data
command channel) is activated.
► Change the setting with [▲] / [▼].
► Use [OK] to acknowledge the changed setting and
scroll to the next display.
OR:
► Use [ESC] to return to screen 87 [Fieldbus Address]
O
O
K
K
109
E
E
S
S
C
C
17.
Fieldbus data
PLC input
8
>
Shows that the fieldbus module 12 (fieldbus data PLC
input) with a length of 8 bytes is activated.
► Change the setting with [▲] / [▼].
► Use [OK] to acknowledge the changed setting and
scroll to the next display.
OR:
► Use [ESC] to return to screen 87 [Fieldbus Address]
O
O
K
K
110
E
E
S
S
C
C
18.
Fieldbus Data
PLC output
10
>
Shows that the fieldbus module 13 (fieldbus data PLC
output) with a length of 10 bytes is activated.
► Change the setting with [▲] / [▼].
► Use [OK] to acknowledge the changed setting and
scroll to the next display.
OR:
► Use [ESC] to return to screen 87 [Fieldbus Address]
O
O
K
K
111
E
E
S
S
C
C
19.
Analog input
Master 1
10
>
Shows that the fieldbus module 14 (analogue input
master 1) with a length of 10 * 4 words is activated.
► Change the setting with [▲] / [▼].
► Use [OK] to acknowledge the changed setting and
scroll to the next display.
OR:
► Use [ESC] to return to screen 87 [Fieldbus Address]
O
O
K
K
112
E
E
S
S
C
C
20.
Analog output
Master 1
8
>
Shows that the fieldbus module 15 (analogue output
master 1) with a length of 8 * 4 words is activated.
► Change the setting with [▲] / [▼].
► Use [OK] to acknowledge the changed setting and
scroll to the next display.
OR:
► Use [ESC] to return to screen 87 [Fieldbus Address]
O
O
K
K
113
E
E
S
S
C
C
