5.2
P
ERIODIC
M
AINTENANCE
P
ROCEDURES
5.2.1 Removing Dust from the Printer Interior
WARNING
To carry out this operation, IER recommends that you
use ecxlusively the can with compressed air supplied
with the cleaning kit, since it has been tested and
approved non-flammable and non-explosive.
IER will not be responsible if any another product is
used.
DO NOT USE THE DUSTER CAN IF THERE IS ONLY
LITTLE AIR LEFT. THE CAN CONTAINS MOSTLY
PROPELLANT
WHICH
IGNITES
EASILY
WHEN
EXPOSED TO THE SLIGHTEST SPARK.
Use the duster can supplied with the IER Cleaning Kit and follow
the safety precautions on the can and those mentioned above,
blow air into the printer to dislodge any paper chaff and dust by
directing the air blow to the following zones:
Arrow #5: inside the two paper guides
Arrow #4: under the two paper guides and into the printing
mechanism
Arrow #3: to the end of the paper path around the sensor
Arrow #2: to the front of the printhead and behind the front panel
where the optional cutter or burster is located (if applicable)
Arrow #1: to the front ejection slot
IER 506B PRINTER
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 31
N0B402A Rev. 3
Dec. 16, 2008