6.4
C
LOSING
/L
OCKING THE
P
RINTHEAD
A
SSEMBLY
6.4.1 Procedure
a) Fully rotate the printhead support (2) towards the front until the
printhead assembly locks into its lower position.
b) Lower the printhead lever (1) to lock the printhead assembly
into the operating position.
c) If no other service operation is to be performed on the printer:
-
close the printer cover
-
connect the data I/O cable
-
connect the printer to the power source
-
switch on the printer
-
and load the printer with media
IER 506B PRINTER
User Guide
Page 44
N0B402A Rev. 3
Dec. 16, 2008
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization