3.5
I
NSERTING
B
LANK
M
EDIA INTO THE
P
RINTER
Preliminary Steps: - Adjust the paper path width, see page 21
- Power up the printer, see page 14
3.5.1 Procedure
a) Insert the leading document of the fanfold or roll media stock
into the insertion slot, made up of the two paper guides (1).
b) Push the document into the printer until it is sensed and drawn
in.
Note:
Once the document has been pulled in, printer initialization starts,
i.e. the media is correctly positioned according to the printer
configuration and to the type of separating marks.
1 - Insertion slot
Figure 3.9
Inserting Blank Media
IER 506B PRINTER
User Guide
Page 24
N0B402A Rev. 3
Dec. 16, 2008
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization