5
PRINTER MAINTENANCE
5.1
R
ECOMMENDED
P
ERIODIC
M
AINTENANCE
S
CHEDULE
Schedule: Every two weeks or after printing 2000 m (6562 ft) of
documents, whichever occurs first.
Estimated Time: 15 min.
Tools Required / Maintenance Products: - Cleaning kit, IER P/N
S32129A
WARNING
Before starting any of these operations, make sure to:
- remove any media from the printer
- switch off the printer
- disconnect the printer from the AC power source
- disconnect the data I/O cable from the printer
5.1.1 Periodic Maintenance Schedule
For
optimum
printer
performance
under
normal
operating
conditions, IER recommends the following periodic maintenance
schedule: every two weeks or after printing of 2000 m (6562 ft) of
documents, whichever occurs first.
IMPORTANT:
However, the periodic maintenance schedule must be
adapted to the particular printer environment and
operating conditions (presence of dust, quality of the
media used, throughput, etc.)
To carry out these operations, it is essential to use the IER
Cleaning Kit, P/N S32129A and to follow the procedures described
in the present document.
CAUTION
IER will not be responsible for any problem consequent
to
the
customer's
failure
to
adhere
to
the
recommendations regarding the maintenance schedule,
the maintenance products and the specific instructions
to follow.
IER 506B PRINTER
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 29
N0B402A Rev. 3
Dec. 16, 2008
