2.2
P
OWERING
U
P THE
IER 506B P
RINTER
2.2.1 Procedure
a) At the rear of the printer, set the AC power switch to the
I-position
Figure 2.3
Powering Up the Printer
For a few seconds, the printer tests the heating elements of the
printhead and displays the test results.
On completion of the testing phase, the printer either
beeps and displays a message requesting paper loading if no
media has been loaded, see page 24, or
is ready for printing, if media has been loaded.
IER 506B PRINTER
User Guide
Page 14
N0B402A Rev. 3
Dec. 16, 2008
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization