IEI Technology WAFER-LX Series Скачать руководство пользователя страница 99

Страница: 99 / 198

Page 99

WAFER-LX

BIOS Menu 3: Advanced BIOS Features

Virus Warning [Disabled]

NOTE:

Many disk diagnostic programs can cause the above warning message to

appear when the program attempts to access the boot sector table. If you

are running such a program, it is recommended that the virus protection

function be disabled beforehand.

Use the

Virus Warning

option to enable BIOS to monitor the boot sector and partition

table of the HDD for any attempted modification. If a modification attempt is made, the

BIOS halts the system and an error message appears. If necessary, an anti-virus program

can then be run to locate and remove the virus before any damage is done.

Enabled

Activates automatically when the system boots up

causing a warning message to appear when anything

attempts to access the boot sector or HDD partition table.

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 99 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: