IEI Technology WAFER-LX Series Скачать руководство пользователя страница 2

Страница: 2 / 198

-2

OIEI

Technology, Corp

REVISION HISTORY

Title

WAFER-LX AMD Geode LX 800

Revision Number

Description

Date of Issue

1.0

Initial release

September 2006

1.1 Modified

Section 2.4

December 2006

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event is the manufacturer liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

IBM PC is a registered trademark of International Business Machines Corporation. INTEL

is a registered trademark of INTEL Corporation. AMI is registered trademarks of American

Megatrends Inc. Other product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 2 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: