IEI Technology WAFER-LX Series Скачать руководство пользователя страница 102

Страница: 102 / 198

Page 102

IEI® Technology, Corp

WAFER-LX

devices if the first one is not found.

Enabled

(Default)

The system looks for second and third boot devices if the

first one is not found.

Boot Up Floppy Seek [Disabled]

Use the

Boot Up Floppy Seek

option to enable the BIOS to determine if the floppy disk

drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while

760K, 1.2M and 1.44M FDDs all have 80 tracks.

Disabled

(Default)

BIOS does not search for the type of FDD drive by track

number. Note that there is no warning message if the

drive installed is 360K.

Enabled

BIOS searches for a FDD to determine if it has 40 or 80

tracks. Note that BIOS cannot tell the difference between

720K, 1.2M or 1.44M drives as they all have 80 tracks.

Boot Up Numlock Status [On]

Use the

Boot Up Numlock Status

option to specify the default state of the numeric

keypad.

Off

The keys on the keypad are not activated.

(Default)

Activates the keys on the keypad.

Gate A20 Option [Fast]

Use the

Gate A20 Option

option to set if the keyboard controller or the chipset controls

the Gate A20 switching.

Normal

The keyboard controller does the switching.

Fast

(Default)

The chipset does the switching.

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 102 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: