IEI Technology WAFER-LX Series Скачать руководство пользователя страница 103

Страница: 103 / 198

Page 103

WAFER-LX

Typematic Rate Setting [Disabled]

Use the

Typematic Rate Setting

configuration option to specify if only one character is

allowed to appear on the screen if a key is continuously held down. When this option is

enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held

down, it begins to report that the key has been pressed repeatedly. This feature

accelerates cursor movement with the arrow keys.

Disabled

(Default)

Disables the typematic rate.

Enabled

Enables the typematic rate.

Typematic Rate (Chars/sec) [6]

The

Typematic Rate

option can only be configured if the

Typematic Rate Setting

enabled. Use the

Typematic Rate

option to specify the rate keys are accelerated.

(Default)

6 characters per second

8 characters per second

10 characters per second

12 characters per second

15 characters per second

20 characters per second

24 characters per second

30 characters per second

Typematic Delay (Msec) [250]

The

Typematic Rate

option can only be configured if the

Typematic Rate Setting

enabled. Use the

Typematic Delay

option to specify the delay time between when a key

is first pressed and when the acceleration begins.

250

(Default) 250

milliseconds

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 103 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: