IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 82 / 198

Page 82
IEI® Technology, Corp .
WAFER-LX
4.4.1 DIMM Module Installation
4.4.1.1 Purchasing the Memory Module
When purchasing SO-DIMM modules, the following considerations should be taken into
account:
The SO-DIMM socket can support a memory chip with a maximum size of
1GB
The SO-DIMM socket supports SDRAM DIMM speeds of 333MHz and
400MHz
4.4.1.2 DIMM Module Installation
The WAFER-LX motherboard has two DDR SDRAM DIMM sockets. To install the DIMM
modules, follow the instructions below.
Step 1:
Step 2:
Step 3:
Step 4:
Locate the SO-DIMM module connector.
Push the SO-DIMM chip into the socket at an angle. (See Figure 4-1 )
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM module down. (See Figure 4-1 )
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM module in the socket. Step 0:
Figure 4-1: SO-DIMM Module Installation