IEI Technology WAFER-LX Series Скачать руководство пользователя страница 100

Страница: 100 / 198

Page 100

IEI® Technology, Corp

WAFER-LX

Disabled

(Default)

No warning message appears when there is an attempt

to access the boot sector or HDD partition table.

CPU Internal Cache [Enabled]

Use the

CPU Internal Cache

option to enable or disable the internal CPU cache.

Disabled

The internal CPU cache is disabled.

Enabled

(Default)

The internal CPU cache is enabled.

Quick Power On Self Test [Enabled]

Use the

Quick Power On Self Test

option to speed up the POST after the computer is

turned on. If enabled, BIOS shortens or skips some POST check items.

Disabled

Normal POST occurs after the computer is turned on.

Enabled (Default) Quick

POST

occurs

after the computer is turned on.

Boot From LAN Control [Disabled]

Use the

BOOT From LAN Control

option to enable the system to be booted from a

remote system.

Disabled

(Default)

The system cannot be booted from a remote system

through the LAN.

Enabled

The system can be booted from a remote system

through the LAN.

SATA Boot ROM Control [Disabled]

Use the

SATA Boot ROM Control

option to configure SATA IDE use in DOS mode.

Disabled

(Default)

Disables SATA IDE use in DOS mode.

Enabled

Enables SATA IDE use in DOS mode.

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 100 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: