IEI Technology WAFER-LX Series Скачать руководство пользователя страница 95

Страница: 95 / 198

Page 95

WAFER-LX

IDE Secondary Slave

IDE device configurations are changed or set in the IDE Configuration menu. If an IDE

device is detected, and one of the above listed two BIOS configuration options is selected,

the IDE configuration options shown in

Section 5.2.1

appear.

Drive A [None]

Use the

Drive A/B

configuration to specify the floppy drive type installed in the system.

The floppy drive configuration options are:

None

360K, 5.25 in.

1.2M, 5.25 in.

720K, 3.5 in.

1.44M, 3.5in (Default)

2.88M, 3.5 in.

Halt On [All, But Keyboard]

Use the

Halt On

option to specify what errors detected during the power up process stop

the system.

All Errors

Whenever BIOS detects a non-fatal error the

system is stopped and the user prompted.

No Errors

The system boot is not stopped for any errors

that may be detected.

All, But Keyboard

(Default) The

system

boot

does not stop for a keyboard

error; it stops for all other errors.

All, But Diskette

The system boot does not stop for a disk

error; it stops for all other errors.

All, But Disk/Key

The system boot does not stop for a keyboard

or a disk error; it stops for all other errors.

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 95 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: