※
iCON100/iCON100-SR QUICK INSTALLATION GUIDE
2
1. IMPORTANT SAFETY INSTRUCTIONS
The description below is to keep user’s safety and prevent any product damage. Please fully read
these instructions and use the product properly.
Danger: This symbol indicates that incorrect handling of the product may result in
serious injury or death.
Warning: This symbol indicates that incorrect handling of the product may result in
injury or property damage.
- Only use the standard voltage (DC +12V/ 350mA).
- If the product emits smoke or smells, stop using the product. Unplug the product from DC power source
and contact nearest service center.
- Do not install the product in a place containing a lot of moisture, dust (metallic dust) or subject to splashing
water.
- Do not install the product in a place subject to high temperature, low temperature or high humidity
- Do not install the product with tools such as driver in hand when power is being supplied.
- Do not drop liquid like water onto the product and give the product a severe shock.
- Do not place magnetic objects near the product.
- Do not replace the wiring cables installed by experts.
- Do not let anyone but the manger touch the product except using it for normal purpose.
- Do not use the product under direct sunlight or near heat-producing apparatuses.
- If you want to relocate the installed product, turn power off and then move and reinstall it.
- Do not use flammable sprays or objects near the product.
- Do not touch the product with wet hands.
- If liquid has been spilled on the product, unplug it and contact nearest service center.
- Do not use the product for the purposes which are not specified in the manual.
- Do not operate the product with sharp objects.
- Do not clean the product with water. Clean gently with dry cloth or towel.
- Do not use chemicals such as benzene, thinner or acetone for cleaning.
CAUTIONS ABOUT INSTALLATION
CAUTIONS ABOUT USAGE
CAUTIONS ABOUT CLEANING
CAUTIONS ABOUT POWER
