※
iCON100/iCON100-SR QUICK INSTALLATION GUIDE
23
6.3.2 How to wire TCP/IP Communication
Optional TCP/IP module is required for TCP/IP communication between the iCON100 and the PC. Please
follow the instructions below;
1. Connect the LAN cable of the network system to the RJ45 jack of the iCON100.
2. Set the board ID of the iCON100.
3. Install and run the iCON100 application software.
Figure: TCP/IP Connection between iCON100 and PC
6.4 TCP/IP Converter (External Version)
When using the TCP/IP converter for communication, select either RS232 or RS422.
Figure: TCP/IP Converter between Host PC and iCON100
7. INITIALIZATION
7.1 Initialization of iCON100
Initialization is needed before initial installation or when any function is not operated properly.
For initialization, press 2 initialization switches simultaneously then keep pressing more than 2 seconds. Once
buzzer sound is generated, release 2 switches then initialization is done and system restart automatically.
After all initialization process is completed, the system will be operating in the normal mode and the LCD will
display “
iCON100 [F1], MM/DD hh : mm : ss
”.
INTERFACE
iCON100
ILAN422
LINE COLOR
RS232
TX (CON2)
RX (RS232 DSUB9)
BLACK+WHITE
RX (CON2)
TX (RS232 DSUB9)
RED + WHITE
GND(CON2)
GND
BLACK
RS422
TX+ (CON3)
RX+ (RS422 CONNECTOR)
GRAY
TX- (CON3)
RX- (RS422 CONNECTOR)
YELLOW
RX+ (CON3)
TX+ (RS422 CONNECTOR)
BROWN
RX- (CON3)
TX- (RS422 CONNECTOR)
BLUE
