IDTECK GE313, Руководство по эксплуатации

Страница: 42 / 71

42
2. Registration by Keypad
1.
Scanning…
The reader is waiting for the ID number to be registered. The card number will appear with a
beep sound when you present the card. ID number is 8digit number.
2.
ID:
ID number consists of 4~8 digit. Enter 4~8digit ID number (PIN) and press <
ENT
> key on the field.
3.
PW:
PW is the password which can be used to access the doors with RF + Password operating mode. It is
necessary to enter a default password (‘
0000
’) when you register an ID.
4.
TA:
TA is the Time Schedule code (‘
00
’ ~ ‘
10
’) for the Reader#1 (Built-in Reader). When you present the
card to the Reader#1, the cardholder is only allowed the access of the door during the Time intervals of the
Time Schedule code entered to TA. To setup the Time intervals for each Time Schedule code, refer to the
Time Schedule Setup on the [
F5 SETUP MENU
]. If you want to access the door anytime for the cardholder
then enter the default Time Schedule code '00' for the value.
5.
TB:
TB is the Time Schedule code (‘
00
’ ~ ‘
10
’) for the Reader#2 (Exit Reader). When you present the
card to the Reader#2, the cardholder is only allowed the access of the door during the Time intervals of the
Time Schedule code entered to TB. To setup the Time intervals for each Time Schedule code, refer to the
Time Schedule Setup on the [
F5 SETUP MENU
]. If you want to access the door anytime for the cardholder
then enter the default Time Schedule code '00' for the value.
6.
RD
: RD is the Reader Assignment code for the cardholder. Code ‘0’ assigns for both readers (Built-in
Reader and Exit Reader), code ‘1’ only assigns Reader#1 (Built-in Reader) and code ‘2’ only assigns
Reader#2 (Exit Reader). If you put ‘1’ for RD (Only Reader#1 assigned) and try to exit through Reader#2
(Exit Reader) then GE313 generates an error message (“Access Door Error”) on the LCD display.