Page | 47
8.9.14
Manual PAN Entry Support
Command Body:
75 46 06 <Para>
Where:
Para is 1 byte.
Bit
0
1
Bit0
User does not input CVV data. User inputs CVV data.
Bit1
User does not input ADR data. User inputs ADR data.
Bit2
User does not input ZIP data. User inputs ZIP data.
Response Body:
•
If a related key (Data key or MAC key) was not loaded, the response is 15 04 00.
•
If a Data DUKPT Key was STOP, the response is 15 73 00.
•
Upon command execution, the device first displays “Enter PAN” and waits for the user to enter
PAN Data. The format is: (Pre-PAN and Post-PAN is default value), which the LCD displays when
the user enters data: (The Pre-PAN and Post-PAN Len default is four). The whole pan data length
is between 12~19:
111
1111****
1111********1111
•
If the user presses
Enter
, the device displays “Enter Valid Date” and waits for the user to enter
date data. All four bytes should be entered, which the LCD displays on entry:
MM/YY
11/YY
11/18
•
If the user presses
Enter
, due to command parameters the L100 outputs “Enter CVV” and waits
for the user to enter CVV data. The data length is three or four and is masked with “*”.
•
If the user presses
Enter
after entering CVV data, due to command parameters the L100 outputs
“Enter Address” and waits for the user to enter ADR data. The data length is 0 or 20 and output
in plaintext. The user can also press
Enter
to go on to the next step if no data is entered.
•
If the user presses
Enter
after entering ADR data, due to command parameters the L100 outputs
“Enter ZIP code” and waits for the user to enter ZIP data. The data length is 0 or 20 and output
in plaintext. The user can also press
Enter
to go to the next step if no data is entered.
•
The PAN data input process waits three minutes and other data input processes wait one
minute.
•
Per 20 Seconds, if the PAN length is not zero, the PAN is clear.
•
If the user presses
Backspace
, the L100 decrements the digits on the LCD if the total data length
is not 0.
•
If the user presses
Cancel
, the L100 displays a cursor on LCD if the total PIN length is not 0, or
L100 quits the work state.
•
When the Cancel command is sent or the user presses
Cancel
, the L100 quits the work state.
•
The port outputs key information during the whole operation. During the steps in which the user
enters PAN and CVV, the output displays as ‘*’ when numeric keys are pressed; plaintext data is
displayed during the other three steps.
Backspace
,
Cancel
, and
Enter
output is displayed as ‘B’,
‘C’ and ‘E’.