IDK FDX-08 Скачать руководство пользователя страница 99

Страница: 99 / 102

FDX-08 User Guide

Problem

Cause/Check item/Solution

Page

● Video output (Cont’d)
Video blinks

If interlace signal is input to a sink device that does not support

interlace signals, the video may blink. Check the output resolution

of the sink device.

－

Video edges

(top/bottom/right/left)

are cut out.

Some sink devices overscan input video, and the video may be cut

out. Check the display setting of the sink device.

－

Video looks

shrunken horizontally

or vertically.

Some sink devices display input video with full screen mode, and

the aspect ratio cannot be kept. Check the display setting of the

sink device.

With some resolutions, full-screen display cannot be avoided.

In that case, change the output resolution of the source device.

－

Black bars appear on

PC images.

Only part of the PC

image is displayed,

and the rest of the

images is displayed

by moving the

mouse.

If the PC has the Panel Fit function, select “Scale Full Screen”.

If the resolution that is set for the PC and the resolution that is

actually output from the PC are not matched, those problems may

occur. Check the resolution of the PC and the EDID resolution

setting.

The dual monitor

function cannot be

set or it is canceled

automatically.

When the No-signal input monitoring function works, the dual

monitor function may not be enabled correctly. In this case, turn off

this monitoring function.

Video is displayed in

purple or green.

Some sink devices do not find the color space of the input video

correctly, and the video may be displayed in purple or green. Set

the correct color space in the output mode to solve this problem.

Connected sink device may not detect the color space of the input

video and then displays the video in purple or green. Some sink

devices that are connected to the SDI loop-through output

connector support only either 3G-LevelA or 3G-LevelB SDI signal

mapping, and they also do not support 4:4:4 (RGB or YCbCr)

formats. Check if the same problem occurs when connecting

directly the source and sink devices without connecting to the SDI

loop-through output connector.

－

Содержание FDX-08







































































































Результаты поиска

Содержание FDX-08

Отзывы:

IDK FDX-08, Руководство пользователя, Страница: 99 / 102

Результаты поиска

Содержание FDX-08

Отзывы: