IDK FDX-08, Руководство пользователя, Страница: 26 / 102

FDX-08 User Guide
26
7.2 Selecting I/O channels
You can select I/O channels using INPUT SELECT and OUTPUT SELECT keys. If you want to select an input
channel first, select “INPUT
→
OUTPUT” mode; in the opposite case (you want to select output channels first),
select “OUTPUT
→
INPUT” mode.
If you do not operate these keys for 60 seconds, the power saving function will be enabled.
【
See: 8.10.3 Power saving [POWER SAVE]
】
7.2.1 Selecting I/O channel in
INPUT→OUTPUT mode
Selecting an input channel first and then selecting output channels:
2
1
4
3
Selecting I/O channel
in INPUT
→OUTPUT mode
Notes :
・
Channels that do not have a board cannot be selected.
・
The selected output channels can be OFF (no signal) by pressing the “OFF” key.
・
The selected input channel can be output to all output channels by pressing the “ALL” key.
Procedure
1
Select the desired mode by pressing the SWITCHING MODE key
(LEDs of input and output channel keys that corresponding to the selected mode will be turned on.)
2
Select “INPUT
→
OUTPUT” mode by pressing the SELECT MODE key.
(The LED of the SELECT MODE key will be turned off.)
3
Select an input channel by pressing an INPUT SELECT key (“1” to “8” or “OFF”)
(LEDs of the currently selected output channels will be turned on.)*
4
Select output channels by pressing OUTPUT SELECT keys (“1” to “8” or “ALL”)
*