IDK FDX-08 Скачать руководство пользователя страница 71

Страница: 71 / 102

FDX-08 User Guide

8.7.12 Dolby TrueHD Audio [EDID Dolby TrueHD]

You can set the maximum sampling frequency of Dolby TrueHD Audio that is output from the source device.

【

See: 8.7.1 EDID resolution [EDID DATA]

】

Menu

EDID → EDID Dolby TrueHD

Setting for

Each input connector (IN1 to IN8)

Setting value

OFF [Default]

44.1kHz

48kHz

88.2kHz

96kHz

176.4kHz

192kHz

Notes:

・

Press the SET key to apply the setting.

・

Some LC monitors do not support some audio formats.

Select the audio format and sampling frequency that are supported by the device.

・

The setting will be applied only if the EDID resolution is set to one of “05” to “24”.

・

Only channels of input board can be selected in this menu.

Channels in which an SDI input board cannot be selected.

8.7.13 WXGA [EDID WXGA SELECT]

You can set the number of WXGA pixels based on the resolution setting of EDID.

Menu

EDID → EDID WXGA SELECT

Setting for

Each input connector (IN1 to IN8)

Setting value

1360x 768 [Default]

1366x 768

Notes:

・

Press the SET key to apply the setting.

・

The setting will be applied only if the EDID resolution is set to one of “05”, “08” and “16” to “22”.

・

Only channels of input board can be selected in this menu.

Channels in which an SDI input board cannot be selected.

Содержание FDX-08







































































































Результаты поиска

Содержание FDX-08

Отзывы:

IDK FDX-08, Руководство пользователя, Страница: 71 / 102

Результаты поиска

Содержание FDX-08

Отзывы: