IDK FDX-08 Скачать руководство пользователя страница 2

Страница: 2 / 102

FDX-08 User Guide

Trademarks



Blu-ray Disc and Blu-ray are trademarks of Blu-ray Disc Association.



ETHERNET is a registered trademark of Fuji Xerox Co., Ltd.



The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.



HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance.



Microsoft, Windows, Internet Explorer are either registered trademarks or trademarks of the Microsoft

Corporation in the United States and other countries.



The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan.



All other company and product names mentioned in this manual are either registered trademarks or

trademarks of their respective owners. In this manual, the “

” or “

™

” marks may not be specified.

Содержание FDX-08







































































































Результаты поиска

Содержание FDX-08

Отзывы:

IDK FDX-08, Руководство пользователя, Страница: 2 / 102

Результаты поиска

Содержание FDX-08

Отзывы: