FDX-08 User Guide
48
8.4 Output settings [OUTPUT SETTING]
8.4.1 Output equalizer [OUTPUT EQUALIZER]
Menu
OUTPUT SETTING → OUTPUT EQUALIZER
Setting for
Each output connector (OUT1 to OUT8, ALL)
Setting value
OFF: No correction [Default]
LOW
MEDIUM
HIGH
Notes:
・
If you use a 16 ft. (5 m) or longer cable, we recommend that you test the configuration beforehand since
it is greatly affected by the quality of the output signals and the like.
・
Set this menu before operating the FDX, since the image may be disturbed when the setting is switched.
・
Only channels of digital output board or digital scan converter output board can be selected in this menu.
8.4.2 Output mode [OUTPUT MODE]
The sink device automatically selects the appropriate color space according to the color space of the input
video. If the sink device cannot select the color space for some reason, the color space can be manually
selected using this menu.
Menu
OUTPUT SETTING → OUTPUT MODE
Setting for
Each output connector (OUT1 to OUT8, ALL)
Setting value
AUTO : Automatic [Default]
HDMI RGB: RGB output
HDMI 422 : YCbCr 4:2:2 output
HDMI 444 : YCbCr 4:4:4 output
DVI : DVI output
Note:
Only channels of digital output board can be selected in this menu.