background image

122

IDIS Web is a program that allows you to view and search video from remote locations over the Internet and can be 
accessed on a regular web browser such as Internet Explorer.
System requirements for running IDIS Web are as follows:

 

  OS:  Microsoft

®

 Windows

®

 7 (Home Premium, Professional, Ultimate), Microsoft

®

 Windows

®

 8 (Pro, Enterprise) or 

Microsoft

®

 Windows

®

 10 (Home, Pro)

 

 CPU: Intel Pentium IV 2.4GHz or above (Core 2 Duo E4600 recommended)

 

RAM: 1GB or more

 

VGA: 128MB or more (1280x1024, 24bpp or above)

 

 Internet Explorer: Ver. 7.0 or above (32-Bit)

 

IDIS Web only works with Microsoft Internet Explorer and will NOT work with other browsers.

 

IDIS Web does not work in Microsoft® Windows® 8 metro UI.

Launch Internet Explorer and then enter the following information in the address bar.

 

– http://IP Address:Port Number (NVR system's IP address and IDIS Web port number configured under Network 

> General (Default Value: 12088))

 

–  http://fen.idisglobal.com/FEN Name (FEN Name: NVR name configured on the FEN server)

 

– http:/web.idisglobal.com (will be prompted to enter NVR's IP address or FEN name registered to the FEN server 

upon login)

Contact your network administrator for the IP address of the NVR you wish to connect to and the IDIS Web port number.

Part 4 - IDIS Web

Содержание DR-8300 Series







































































































































Отзывы: