Part 3 - Search
83
Do not disconnect the USB cable or power off the USB
device while USB Clip Copy is in progress. Doing so
can cause the NVR to malfunction or critically damage
the external USB device's file system. You may be
prompted with an error message when trying to back
up on the device. If so, you will need to restart the NVR.
If the USB hard disk's file system has been damaged,
restarting the NVR will not solve the problem and
the aforementioned error message will continue to
be displayed each time you attempt a backup. If this
is the case, you will need to format the HDD or use a
recovery program to repair the damage to the drive's
file system.
Print the current image.
While in
Search Mode
, select
Pause
to pause playback.
Select
from the Search menu to open up the Print
Setup window.
●
Printer Model
–
File Printer
: Saves the current frame to the USB
storage device or the NetFS site as a .pdf file
that can be printed on a printer connected to a
computer.
●
Paper Size
: Select the desired paper size.
●
File name
: Designate a name for the file.
