Part 2 - Configuration
56
Trip Zone
●
No.
: Select which cameras to apply Trip Zone to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
Use the mouse to drag the zone and then select, clear,
or reverse the selection.
From the zone selection screen, right-click on the mouse
to open up the Zone Setup menu.
–
Select
: Confirm the block selection in the selection
window.
–
Clear
: Clear the block selection in the selection
window.
–
Reverse
: Clear the blocks selected within the
selection window and select all unselected blocks
within the selection window.
–
Select All
: Select all blocks.
–
Clear All
: Clear all block selections.
–
Reverse All
: Clear all selected blocks within the
screen and select all unselected blocks within the
screen.
–
Trip Direction
: Define in which direction the
motion has to occur in order for it to be considered
an event. Select In for movements from outside the
selection area in or Out for movements from inside
the selection area out.
–
OK
: Save the changes and exit the menu.
–
Cancel
: Exit the menu without saving the changes.
