IDEC MICRO/I HG2J-7U, Руководство по оборудованию

Страница: 135 / 149

MICRO/I Hardware Manual
2-27
2 Analog I/O Modules
2
Ex
pa
ns
io
n M
od
ule
s
Analog Input Parameter Setting Values
The parameter setting values are as follows.
■ Signal Type
If the setting value is outside the range, a parameter setting error will occur.
■ Data Format
If the setting value is 4 to 65,535, a parameter setting error will occur.
■ Min., Max.
The values of
Min.
and
Max.
can be set only when
Data Format
is set to
Optional range
. Set the minimum and
maximum values between -32,768 and 32,767. However, when
Signal Type
is set to
PTC Thermistor (threshold)
,
set the values of
Min.
and
Max.
between 100 and 10,000.
Setting Value Signal Type
0 Unused
1 0 to 10V DC
2 -10 to +10V DC
3 0 to 20mA DC
4 4 to 20mA DC
5 Type K thermocouple
6 Type J thermocouple
7 Type R thermocouple
8 Type S thermocouple
9 Type B thermocouple
10 Type E thermocouple
11 Type T thermocouple
12 Type N thermocouple
13 Type C thermocouple
14 Pt100
15 Pt1000
16 Ni100
17 Ni1000
18 NTC Thermistor
19 PTC Thermistor
20 PTC Thermistor (threshold)
21 Ohm meter
22 Expansion 0 to 20mA DC
23 Expansion 4 to 20mA DC
Setting Value Data Format
0 Binary data, Binary data (12bit)
1 Optional range, Optional range (12bit)
2 Celsius (℃), Resistance (Ω), Binary data (16bit)
3 Fahrenheit (℉), Optional range (16bit)