IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - E-mail: [email protected]
User Guide PPS-TWIN
V1.0 - Module V1.7
Page 32
9.
Configuration (continued)
9.4 PPS-TWIN/POLARIS CANBUS Control
When the PPS-TWIN is connected with CANBUS to the POLARIS, you need :
1) Configure your PPS-TWIN as usual for the tones and its activators.
2) Configure the POLARIS to be able to control the PPS-TWIN with extended outputs.
3) Create an extended output, choose its activator in the POLARIS then select which « input » of the PPS-TWIN is the
mirror of this extended output. So the function of the extended output is the same as the function configured for the
input of the PPS-TWIN inside the PPS-TWIN configuration.
