IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - E-mail: [email protected]
User Guide PPS-TWIN
V1.0 - Module V1.7
Page 12
5.
*
*available soon
Elements installation
Use only screws, nuts, and washers provided
by the manufacturer.
Using other, longer screws in the back of the
console may seriously damage its internal
parts.
The manufacturer cannot assure any
warranties or accept liability if other fixing
elements or screw, nuts, and washers are
used to install the console.
Ü
Preassemble the console without blocking the 2 hexagonal head screws
Ü
Choose the best place to install the console on the dashboard.
Ü
Locate and note the 6 fixation holes at the base of the f
oot (page 18).
Ü
Fix the base and position the console perfectly.
Ü
Block the 2 hexagonal head screws.
Ü
Attach the cover to the back of the foot with the screw provided.
Ü
Place the small black cap on the head of the screw on the back.
5.1.1 Console mounting
The safety of future users of this product depends on your installation. Therefore, it is critical that
you read, understand, and follow all instructions contained in this installation guide.
Ü
You can configure the keys on the keypad using the set of 88 pictograms provided.
Ü
To ensure good adherence of the pictogram to the cavity on each key, avoid touching the adhesive
part of the pictograms and the key cavities with your fingers.
5.1.2 Pictograms fixing
5.1 MK-10 Console Installation
