IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - E-mail: [email protected]
User Guide PPS-TWIN
V1.0 - Module V1.7
Page 31
9.
If the PPS-TWIN is connected by canbus to a POLARIS central unit, you can use the method described in point 9.3.1
or send the configuration directly through the POLARIS.
To do this, connect your USB cable to a POLARIS console (Fig. 1) or directly to the POLARIS central unit (Fig. 2).
Then send the configuration by clicking on the "Write" button from the PPS-TWIN configurator of the SpeedFitter.
Make sure the PPS-TWIN and POLARIS are powered up and initialised.
9.3.2 PPS-TWIN connected to POLARIS
Configuration (continued)
9.3 Sending the Configuration in the PPS-TWIN
9.3.1 Standalone PPS-TWIN
Connect directly your computer to the PPS-TWIN module with the USB cable as described here below :
Then click on button « Write » in the SpeedFitter configurator.
Check first that the PPS-TWIN is well powered up and initialised.
