IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - E-mail: [email protected]
User Guide PPS-TWIN
V1.0 - Module V1.7
Page 16
5.
ON
OFF
SW1
SW2
ON
OFF
ON
OFF
FSP-4K
FSP-6K
FSP-9K
*available soon
*
Ü
Fix the console only with the screws provided.
Ü
ATTENTION: The force applied to tighten the screw depends on wall type. It must never be too high. The
manufacturer will not provide repairs under warranty if the top side of the console is broken due to exceeded
tightening force.
Use a flat surface to mount the console.
Elements installation (continued)
5.2.6 FSP-4K, FSP-6K and FSP-9K wihtout housing - wall mounting
5.2 FSP-4K, FSP-6K and FSP-9K Installation (continued)
5.2.7 FSP-4K, FSP-6K and FSP-9K - dipswitches configuration
Before installing the FSP console, check the dipswitches to be sure that all is on OFF position.